Three custom made silicone ear plugs
THE ULTIMATE IN EAR DEFENCE
line decor
   HOME  ::  
line decor
 


 
 
 

 
 

TECHNICAL DETAILS

 

Custom made earplugs:

Material:

The material used to produce the floatable earplugs is an addition-vulcanising silicone with a stable thixotropic consistency. And is highly physiologically friendly. Here are some more details:

Total processing time:................90 ± 15 seconds

Setting time: ..............................4 mins ±  30 seconds

Final hardness:..........................40 ± 3 Shore A

Deformation under pressure:......7.5 ± 0.5%

Recovery from deformation:........> 99.8%

Linear dimensional change:........< 0.2%

Consistency:...............................Putty – type 0

 

The mixing and processing time refer to a room temperature of 23°C  ±  1°C  and a relative air humidity of 50%, being processed in an aural cavity of 37°C  ± 1°C.  Lower temperatures significantly prolong the processing time and higher temperatures accelerate the processing time.

 

Custom Earplug attenuation:

 

250Hz

500Hz

1kHz

2kHz

4kHz

6kHz

8kHz

Mean attenuation dB SPL – Ref: 20mPa

31.1

33.4

35.7

36.2

39.8

43.9

42.2

     

    This is equivalent to a Class 5 hearing protection. Note that SNR and NRR are not sufficient measures as they are primarily designed for non-custom ear defenders. It is obvious to think of the different qualities each person experiences with custom made hearing protection, as all ears are different. Many laboratories will test a large number of custom made ear defenders to find a generalized attenuation level.

    Audio earplugs:

     

    Skull Candy earphone transducers:

    • High quality steel / Neodymium / Boron driver unit
    • Metal in-ear design
    • Gold plated 3.5mm stereo jack
    • 3 sizes of interchangeable ear pads for traditional earphone use
    • Frequency response:     15hz – 24kHz
    • Rated input:          3mW
    • Maximum input:            10mW
    • Impedance:           32Ω
    • Sensitivity:           104dB/1mW (SPL @ 1kHz)
    • Driver diameter:           10mm
    • Sound film thickness:        6mm
    • Audio connector:           3.5mm stereo jack
    • Connecting cable length:      1.15m

    N.B. Using a unique manufacturing technique, I can mould your own special pair of earphones inside your own custom made earplugs! Perfect sound in perfect comfort - PERFECT!